Maytag Washer Error Code d5

The d5 code on a Maytag washer indicates a Coin 1 error, which means there is either a blockage in the Coin 1 coin drop mechanism or a failure in the coin drop UI control circuit. While this fault is active, the machine disables coin recognition and the customer display. It is specific to coin-operated commercial Maytag washers.

Clearing the error code and unplugging the washer is the recommended first step, but a reset alone will not fix the underlying problem if a blockage or circuit fault is still present. The code will return if the coin sensor is still dirty or blocked, or if a component has actually failed. The reset is only effective as a permanent fix if the cause was a temporary or self-resolving condition.

If the cause is simply a dirty or blocked coin sensor, the repair cost is minimal, covering only the time to clean the component. If the coin acceptor assembly needs replacement, parts and labor costs typically range from around $75 to $200 or more depending on the specific unit and service rates in your area. A failed UI control board is generally the most expensive scenario, with total repair costs potentially ranging from $150 to $400 or higher.

Start by clearing the error code, then unplug the washer and thoroughly clean the coin sensor and coin drop path to remove any obstructions or debris. If the code returns after cleaning, check the wiring harness connections between the coin acceptor and the control board. Persistent faults after those steps may indicate a failed coin acceptor assembly or UI control board that requires replacement.

The d5 fault disables coin recognition and the customer display, so the machine will not accept payment and normal operation for customers will be unavailable while the fault persists. There is no safety hazard associated with the d5 code itself, but the machine should be serviced promptly to restore proper operation. Do not attempt to bypass the coin mechanism as a workaround.