mypros+
Model reference

Fisher & Paykel E522BLXFDU-23218A

Refrigerator

10 documents38 error codes9 service modes

Available documentation

Service Manual

  • Service Manual ACTIVE SMART Refrigerator/Freezer Ice And Water Models45 pg
    Covers this model
  • Electronic 790 Refrigerator / Freezer21 pg
    Covers this model
  • Electronic 790 Refrigerator / Freezer21 pg
    Covers this model
  • Electronic 790 Refrigerator / Freezer21 pg
    Covers this model
  • Electronic 790 Refrigerator / Freezer21 pg
    Covers this model
  • Electronic 790 Refrigerator / Freezer21 pg
    Covers this model
  • Electronic 790 Refrigerator / Freezer23 pg
    Covers this model
  • Electronic 790 Refrigerator / Freezer Service Manual21 pg
    Covers this model
  • Electronic 790 Refrigerator / Freezer Service Manual21 pg
    Covers this model

Other

  • Fisher Paykel Refrigerator 517804E I and W Supplement43 pg
    Covers this model
MyPros+ Max

Diagnose your Fisher & Paykel E522BLXFDU-23218A.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (38)

CodeMeaning
1On the last power up, the power module failed self test.10The resistance of the FC sensor is outside the normal range (< 660 Ohms).11The current measured for the ambient heater, PC fan and FC fan is lower than…12The current measured for the ambient heater, PC fan and FC fan is higher than…13Low ambient heater is drawing less current than expected; either the heater or…14Low ambient heater is drawing more current than expected; either there is a…15PC fan is drawing less current than expected; either the wiring is open circuit…16PC fan is drawing more current than expected; either the wiring is shorted or…17FC fan is drawing less current than expected; either the wiring is open circuit…18FC fan is drawing more current than expected; either the wiring is shorted or…2The previous 2 defrosts were aborted after 30 minutes.20Flapper heater current low.21Flapper heater current is high.22The resistance of the PC sensor 2 is outside the normal range (> 45K Ohms); PC2…23The resistance of the PC sensor 2 is outside the normal range (< 660 Ohms); PC2…24The resistance of the ice tray sensor is outside the normal range (> 45K Ohms)…25The resistance of the ice tray sensor is outside the normal range (< 660 Ohms)…26Icemaker motor timed out; the icemaker gearbox is not returning to the start…27Icemaker motor current high; motor may be obstructed.28Icemaker solenoid current high.29Icemaker solenoid current low.3The resistance of all the temperature sensors is outside the normal range (>…32Solenoid driver 1 has failed; product has reverted to Solenoid Driver 2 to…33Solenoid driver 2 has failed; Solenoid Driver 1 may still be operational.34Both Solenoid Drivers 1 and 2 have been detected to have a fault.4The resistance of all the temperature sensors is outside the normal range (<…40Icemaker solenoid Transistor 1 Short Circuit; a transistor on the controller…41Icemaker solenoid transistor 2 Short Circuit.5The resistance of the FC sensor is outside the normal range (> 45K Ohms).6The resistance of the FC sensor is outside the normal range (< 660 Ohms).
View all 38 error codes
7The resistance of the Evaporator sensor is outside the normal range (> 45K…8The resistance of the Evaporator sensor is outside the normal range (< 660…9The resistance of the PC sensor is outside the normal range (> 45K Ohms).F30No display signal received (shorted or broken wire).F31No display signal received (shorted or broken wire) clock or data line.F32Solenoid Driver 1 and 2 (transistor) has failed, or the solenoid has failed.F33Solenoid Driver 2 (transistor) has failed.F34Both Solenoid Drivers have failed.

Service modes (9)

  • data_downloadPress and hold the MENU button, then press the UP button for four seconds, then press the DOWN…
  • diagnosticPress and hold the MENU and UP buttons for 4 seconds. The first display shows PC temperature in…
  • flowmeter_calibrationPress and hold the MEASURED FILL button, then press the DOWN button to enter calibration mode
  • forced_defrostWhile pressing and holding the MENU button, press the DOWN button for 4 seconds.
  • forced_harvest_post_jan2009Press LOCK key first, then DOWN + UP keys and hold all three (3) keys for 4 seconds.
  • forced_harvest_pre_jan2009Press and hold down the MEASURED FILL + UP + DOWN buttons for 4 seconds.
  • input_output_statusPress and hold the MENU button, then press the UP button for 4 seconds to enter Diagnostic mode
  • show_off_mode_post_jan2009Press and hold MENU + DOWN + UP buttons for 4 seconds.
  • show_off_mode_pre_jan2009Press and hold MENU + DOWN + UP buttons for 4 seconds.

Full entry steps, exit procedures, and test sequences are available in Max.

Related Fisher & Paykel refrigerator models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax