mypros+
Model reference

Maytag MAH2400AWW

Washer

12 documents25 error codes20 service modes

Available documentation

Tech Sheet

  • 24" Front Load Washer⎯Technical Information12 pg
    Covers this model
  • techsheet 16027174f fr14 pg
    Covers this model

Service Manual

  • Maytag Compact 24" Front Loading Washing Machine Training68 pg
    Covers this model
  • Neptune Commercial High Efficiency Washer Service Manual124 pg
    Covers this model

Bulletin

  • Technical Bulletin - Service Information1 pg
    Covers this model
  • Technical Bulletin - Wiring diagram changes1 pg
    Covers this model
  • Technical Bulletin - Water leaking from dispenser during the wash cycle1 pg
    Covers this model
  • Technical Bulletin - Water leaking from dispenser during the wash cycle1 pg
    Covers this model
  • Technical Bulletin - TDL-0075-B Wiring Diagram Changes1 pg
    Covers this model
  • Technical Bulletin - TDL-0075-B-French Wiring Diagram Changes1 pg
    Covers this model
  • Technical Bulletin1 pg
    Covers this model
  • Technical Bulletin1 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MAH2400AWW.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (25)

CodeMeaning
1ESump thermistor failure (Optional)3EDrive system is not working correctlybETach signal exists without motor running (torque commanded or when not…d10Door lock sense error or due to power line interference; spins inhibited until…d11Motor speed error detected; cycle paused but can be restarted.d13Blocked coin 2 or coin drop control circuit failure; coin recognition and price…d16Not receiving communications from installed debit card reader in Generation 2…d17Door was not locked at the beginning of final spin (MAH21 models).d4Washer door sense error on control board or due to power line interference…d5Blocked coin 1 or coin drop control circuit failure; coin recognition and price…d7Slow fill detected during previous cycle; maximum fill time or max continuous…d8Last drain was slow (drain time greater than 2 minutes).d9Low voltage detected; less than 90 volts AC for 8 seconds.dcDistribute ClothesdLLatch UnlockedEWater sensor level faultFLDoor did not lock after 3 attempts.LEWater fill errorLODoor did not unlock after 3 attempts.ndNo DrainnFNo FillodOpen the DoorOEWater level sensor errortESump thermistor failureUEUnbalance detected during final spin which prevented the spinner from exceeding…

Service modes (20)

  • Board Input TestWhile in Service Mode, press the Temperature key
  • Board Output / System Test["Enter Service Mode.","Press Temperature and Extra Rinse simultaneously to start the Board Output…
  • Board Output TestWhile in Service Mode, press the Temperature and Extra Rinse keys together.
  • Cycle Count DisplayWhile in Service Mode, press the Extra Rinse key.
  • Cycle Credit["Enter Diagnostic Mode (entire display flashing).","Press the slow key (CC will display)."]
  • Diagnostic Code DisplayWhile in Service Mode, press the Chime key and rotate the Cycle Selector knob
  • Diagnostic Mode["Enter the Setup mode (open service door or turn service key).","Press and hold the Delicates &…
  • Display Software VersionWhile in Service Mode viewing diagnostic codes, press Soil Level
  • Fast Time Down TestWhile any test or cycle is running in Service Mode, press the Spin key.
  • Field Diagnostic Cycle["Enter Diagnostic Mode (entire display flashing).","Press the Woolens keypad to start the field…
  • Help Mode["Enter Setup mode.","Navigate to Special Pricing Option mode 2.XX.","Press the Permanent Press…
  • LED/Switch TestWhile in Service Mode, press and hold the Delay Start key.
  • Operational Diagnostic Cycle["Enter Diagnostic Mode (entire display flashing).","Press the WHITES keypad to start the…
  • Quick Service CycleWhile in Service Mode, press and hold the Temperature and Soil Level keys for 3 seconds.
  • Quick Spin Cycle (MAH20 Models)["Enter Diagnostic Mode (entire display flashing).","Press the COLORS keypad to start the quick…
  • Quick Spin TestWhile in Service Mode, press the Delay Start and Temperature keys together.
  • Quick Stop / Advance Step["While in any Service Mode test or cycle, press Spin to initiate Quick Stop."]
  • Relay Test Mode (MAH20PN)["Enter Diagnostic Mode (entire display flashing).","Press the Permanent Press (lower left) keypad…
  • Service ModeWith the washer powered on, press and hold the Spin and Temperature keys simultaneously for 3…
  • Setup / Programming Mode["Insert access door key, turn and lift to remove the access door (PD/PS models).","For PN models

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass