Model reference

Samsung WF395BTPAWR/A2

Name: Samsung WF395BTPAWR/A2
Brand: Samsung

Washer

2 documents22 error codes

Available documentation

Service Manual

Samsung Washer WF393BTPASU A2 Service Manual42 pg
Covers this model

Bulletin

Air vent cap change2 pg
Covers this model

MyPros+ Max

Diagnose your Samsung WF395BTPAWR/A2.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Samsung Washer

2E on my Samsung WF395BTPAWR/A2

M+

Power error occurring during momentary

From Service Manual 311792, p.44:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part DA92-00384N

Main PCB assembly

Error codes (22)

CodeMeaning

2EPower error occurring during momentary power failure; operation restarts from…3EMotor driving error caused by motor coil damage (short-circuit or cut)…AECommunication error where signals between the sub and main PBAs are not sensed…bEMotor hall sensor interference error generated due to too much laundry or…dcUnbalance error caused by laundry distribution imbalance in the drum.dLDoor error during operation caused by incorrectly connected or broken door lock…dSDoor error before operation caused by door hook deformation, door pulled by…E2Switch error (main relay error) where the Power button is pressed continually…E3Motor driving error due to erroneous operating signals from motor hall sensor…FLDoor lock failure error when the door is not locked after the door close…HrHeater relay error caused by short-circuited or disconnected washing heater…LEWater leakage error caused by heater engagement fault, displaced air hose…LODoor unlock failure error when the door is not opened after the door open…ndDrain error caused by damaged pump motor impeller, wrong voltage supply…nFWater supply error caused by foreign material in water supply valve…nF1Water supply error where cold and warm water supply hoses are wrongly engaged…OEOverflow error where water is supplied continually because water level…PFPower error due to under or over voltage supply, use of plug receptacle causing…SFSystem error in case of EEPROM detected fault or PBA problem.SrMain relay of the PBA is short-circuited or the main relay terminal is…SUdSFoaming detected error displayed when too much foaming is detected; also…tETemperature sensor error caused by faulty washing, dry, or duct condensing…

Related Samsung washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass