mypros+
Model reference

Whirlpool GFG471LVQ1

Range

3 documents37 error codes24 service modes

Available documentation

Tech Sheet

  • Whirlpool Range WFG710H0AS0 Tech Sheet8 pg
    Covers this model
  • Tech Sheet - W10348457 - Rev B (FR)8 pg
    Covers this model

Service Manual

  • Troubleshooting Gas and Electric Freestanding Range Electronic Controls70 pg
    Covers this model
MyPros+ Max

Diagnose your Whirlpool GFG471LVQ1.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (37)

CodeMeaning
F1Control failure or UL A/D error(s) detected in the control board.F1 E*Control board failure (all F1 sub-codes indicate control fault).F1 E0Internal board failure.F1 E5Internal board failure.F1 E7Internal board failure.F1 E9Internal board failure.F1-E0EEPROM communication error.F1-E5Sensor out of range.F1-E7PCB thermistor open or shorted.F2Shorted/stuck key detected on the control keypad.F2 E0Keypad disconnected.F2 E1Stuck key.F2 E2Cancel key error.F2-E0Keypad disconnected.F2-E1Stuck key.F2-E2Cancel key error.F3Oven sensor opened or oven sensor shorted.F3 E0Main oven sensor open or shorted.F3 E1Lower oven temperature sensor fault (MRC II double oven models).F3 E2Warming drawer (WD) sensor open or shorted.F3-E0Main oven temperature sensor open or shorted.F3-E2Warming drawer sensor open or shorted.F5 E0Door and switches do not agree (Clean mode).F5 E1Door latch not operating (Clean mode).F5 E2Door switch fault.F5-E0Door and switches do not agree (Clean mode).F5-E1Door latch not operating (Clean mode).F6 E*Control communication failure.F6 E0Lost wide (wired) communication.F6 E1Over temperature during cook mode.
View all 37 error codes
F6 E2Over temperature during clean mode.F6 E3Over temperature (warming drawer).F6-E1Over temperature during cook mode.F6-E2Over temperature during clean mode.F6-E3Over temperature in warming drawer.F9House miswiredGOODNo error(s) found.

Service modes (24)

  • Auto TestEnter Diagnostics Mode (CANCEL > CANCEL > START), then press the 'up' arrow or '+' (plus) key to…
  • Diagnostic Mode (Service Mode)["Press CANCEL, then CANCEL, then START.","Display shows 'TEST ON' with cavity temperature and door…
  • Diagnostics ModeWith the oven not in cooking, broiling, or cleaning mode, press CANCEL/OFF, then CANCEL/OFF, then…
  • Diagnostics Mode (MRC Control)Press CANCEL > CANCEL > START
  • DISPLAYEnter Service Mode (CANCEL > CANCEL > START), press 'up' arrow or '+' to scroll to DISPLAY (step 5).
  • DISPLAY Mode["Enter diagnostic mode (CANCEL > CANCEL > START).","Scroll to 'DISPLAY' (step 5)."]
  • ENG MODEEnter Service Mode (CANCEL > CANCEL > START), press 'up' arrow or '+' to scroll to ENG MODE (step…
  • ENG MODE (Engineering Mode)["Enter diagnostic mode (CANCEL > CANCEL > START).","Scroll to 'ENG MODE' (step 2).","Press START…
  • FAULTSEnter Service Mode (CANCEL > CANCEL > START), press 'up' arrow or '+' to scroll to FAULTS (step 7).
  • FAULTS Mode["Enter diagnostic mode (CANCEL > CANCEL > START).","Scroll to 'FAULTS' (step 7)."]
  • LCC Diagnostic Mode (LCC90/LCC95/LCC180)["Press CANCEL, CANCEL, START in sequence.","Press TEMP/TIME '+' key to cycle through diagnostic…
  • LCC190 Diagnostic Mode (Self Clean, Convection models)["Press CANCEL, CANCEL, START in sequence.","Press TEMP/TIME or TEMP/HOUR '+' key to cycle through…
  • MRC Diagnostic Mode["Press CANCEL, CANCEL, START in sequence.","Press TEMP/TIME '+' key to cycle through diagnostic…
  • MRC Diagnostic Mode (Fan/True Convection Electric - Oven Light entry)["Press CANCEL, CANCEL, START in sequence.","Press TEMP/TIME '+' key to cycle through diagnostic…
  • MRC II Diagnostic Mode (Number 3 key entry - KitchenAid models)["Press OFF/OFF/START or CANCEL/CANCEL/START in sequence.","Press the number '3' key to cycle…
  • MRC II Diagnostic Mode (TEMP/TIME entry)["Press CANCEL, CANCEL, START in sequence.","Press TEMP/TIME '+' keypad to cycle through diagnostic…
  • Relay Test (TEST ON mode)["Enter diagnostic mode (CANCEL > CANCEL > START).","At 'TEST ON' display, press the corresponding…
  • Temperature Adjustment["Press and hold OVEN LIGHT for 5 seconds.","Use Temp/Time or Temp/Hour buttons (model dependent)…
  • Temperature Adjustment (All MRC Controls)1
  • TEST MODE (Relay Checks)Enter Service Mode (CANCEL > CANCEL > START), press 'up' arrow or '+' to scroll to TEST MODE (step…
  • USAGEEnter Service Mode (CANCEL > CANCEL > START), press 'up' arrow or '+' to scroll to USAGE (step 1).
  • USAGE Mode["Enter diagnostic mode (CANCEL > CANCEL > START).","Scroll to 'USAGE' (step 1)."]
  • VERSIONEnter Service Mode (CANCEL > CANCEL > START), press 'up' arrow or '+' to scroll to VERSION (step 4).
  • VERSION Mode["Enter diagnostic mode (CANCEL > CANCEL > START).","Scroll to 'VERSION' (step 4)."]

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass