Model reference
Whirlpool WFG361LVS2
Range
9 documents32 error codes7 service modes
Available documentation
Service Manual
- Whirlpool Range Owners Manual WFG361LVD212 pg
- Whirlpool Gas Range Direct Spark Ignition System29 pg
- Job Aid - 30″ Freestanding Self-Cleaning Gas Range68 pg
- 30″ Freestanding Self-Cleaning Gas Range68 pg
- Whirlpool Gas Range Direct Spark Ignition System KR-2829 pg
Tech Sheet
- Tech Sheet - W10198615 - Rev B_W101986156 pg
Installation Guide
- Installation Instructions20 pg
- Instruction Sheet2 pg
- Instruction Sheet2 pg
MyPros+ Max
Diagnose your Whirlpool WFG361LVS2.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (32)
CodeMeaning
F0 E0Factory defaultF1 E0EEPROM communications error.F1 E1EEPROM checksum error.F1 E2UL A/D error(s).F1 E4Model ID error.F1 E6Latch signal mismatch error.F1E0Internal board failure.F1E1Internal board failure.F2 E0Shorted key.F2 E1Key tail unplugged.F2E0Shorted key (A/D error).F2E1A/D error.F2E2A/D error.F3 E0Oven sensor openedF3 E1Oven sensor shortedF3 E2Bake range over temperature.F3 E3Clean range over temperature.F3 E4Oven sensor openedF3 E5Oven sensor shortedF3 E6Warming drawer sensor open.F3 E7Warming drawer sensor shorted.F3E0Oven sensor opened.F3E1Oven sensor shorted.F3E2BAKE/BROIL range over temperature.F3E3CLEAN range over temperature.F5 E0Door switches do not agree.F5 E1Door latch not operating.F5E0Door and switches do not agree (Clean mode).F5E1Door latch not operating (Clean mode).F5E2Door and switches do not agree (Clean mode).Service modes (7)
- Control Lockout["Check that the oven is off","Press and hold the TO LOCK HOLD 3 SEC keypad for 3 seconds","A tone…
- Diagnostics ModePress CANCEL 2 times and then START within a 5-second period.
- Fahrenheit/Celsius Toggle["Press and hold BROIL for 5 seconds","A tone will sound and '°C' or '°F' will appear on the…
- Last Error Code RecallPress and hold the CANCEL/OFF key for 5 seconds until the last error code is displayed.
- Options Mode["Press and hold TIMER for 5 seconds","'Opt' will appear on display","Use TEMP/TIME keys to cycle…
- Temperature AdjustmentStep 1
- Temperature Calibration Adjustment["Press and hold BAKE for 5 seconds until the oven display shows the current calibration (e.g…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Whirlpool range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass