Maytag Washer Error Code C1

The C1 code on a Maytag washer indicates a blocked coin 1 condition or a coin drop control circuit failure. This error is specific to coin-operated models and means the machine cannot currently recognize coin input or display pricing information. The washer will remain non-functional for users until the fault is resolved.

A power reset may temporarily clear the C1 code from the display, but the error will return if the underlying cause is not corrected. If a coin or debris is blocking the acceptor, or if a circuit fault is present, the code will reappear when the machine powers back on. A permanent fix requires identifying and resolving the physical or electrical fault in the coin drop system.

Repair costs vary depending on the root cause. Clearing a physical coin obstruction yourself costs nothing beyond the time to inspect the unit. Replacing a failed coin acceptor assembly typically runs in the range of $50 to $150 for parts, plus any applicable labor fees. Control board replacement, if needed, is generally more expensive, often ranging from $150 to $400 or more for parts and labor combined.

Start by inspecting the coin acceptor slot for any lodged coins, tokens, or debris and remove any obstructions found. Next, check the wiring harness connections between the coin acceptor and the control board for corrosion or loose pins. If the physical components appear intact, test the coin acceptor assembly for proper operation and replace it if it has failed. Persistent faults after those steps may indicate a control board issue requiring professional diagnosis.

The C1 fault disables coin recognition and price display, so the machine is effectively non-operational for end users and cannot be used to start a wash cycle. There is no immediate safety hazard to the machine itself while the code is present, but the unit should be taken out of service until repaired to avoid customer frustration and potential revenue loss.