Model reference

Frigidaire GCRG3060AFF

Range

4 documents27 error codes2 service modes

Available documentation

Service Manual

Use and Care Guide50 pg
Covers this model

Tech Sheet

ELECTRONIC OVEN CONTROL (EOC) RELAY BOARD SERVICE DATA SHEET - Gas Range with ES541 Electronic Oven Control4 pg
Covers this model

Service Flash

Service Flash CK2203 False Touch on UI Control1 pg
Covers this model

Installation Guide

Installation Instructions - Freestanding Gas Range32 pg
Covers this model

MyPros+ Max

Diagnose your Frigidaire GCRG3060AFF.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Frigidaire Range

F001 on my Frigidaire GCRG3060AFF

M+

Touch failure on the oven user

From Service Manual 913278, p.50:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part 5304504863

Electronic control board

Error codes (27)

CodeMeaning

F001Touch failure on the oven user interface board.F002Touch failure on the oven user interface board.F003The oven user interface board is incorrectly configured.F004Touch failure on the oven user interface board.F005Touch failure on the oven user interface board.F010Oven temperature runaway F011Stuck key F012Keyboard configuration alarm F013Data written to non-volatile memory has failed verification.F015Keyboard error.F017The oven user interface board is unable to configure the touch.F018Oven relay board failure (wiggler).F019The oven user interface board is unable to configure the oven relay board.F022Communication failure between the oven user interface board and the oven relay…F023Communication failure between the oven user interface micro and the touch micro.F025The communication between the oven user interface and the oven relay board…F027The communication between the oven user interface and the oven relay board…F028The communication between the oven user interface micro and the touch micro…F029The communication between the oven user interface micro and the touch micro…F030Open oven temperature sensor (RTD).F031Shorted oven temperature probe (RTD).F033Meat probe temperature sensor shorted or too hot (triggered if meat probe sees…F050A/D Out of Range F090Motor Door Lock mechanism failure F095Motor Door Lock mechanism failure F096The oven door has been detected open during a Self-Clean cycle.SCCSelf-Clean Cancel

Service modes (2)

FTM (Factory Test Mode)["Enter FTM mode (entry sequence not fully detailed in document).","Press self-clean button to…
Temperature Offset Adjustment (Oven Calibration)["Ensure the oven is in a non-cooking mode.","Press and hold the Bake key for 3 seconds.","The…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Frigidaire range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass