mypros+
Model reference

Fisher & Paykel RF175WCRW1FPUS

Refrigerator

1 document36 error codes16 service modes

Available documentation

Service Manual

  • Fisher Paykel Refrigerator RF175 RF195 Service Manual111 pg
    Covers this model
MyPros+ Max

Diagnose your Fisher & Paykel RF175WCRW1FPUS.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (36)

CodeMeaning
1On the last power up, the power/control module failed its self-test.10The resistance of the PC sensor is outside the normal range (< 660 Ohms).11The current measured for the ambient heater, PC fan and FC fan is lower than…12The current measured for the ambient heater, PC fan and FC fan is higher than…13The low ambient heater is drawing less current than expected14The low ambient heater is drawing more current than expected15The PC fan is drawing less current than expected16The PC fan is drawing more current than expected17The FC fan is drawing less current than expected18The FC fan is drawing more current than expected2The previous 2 defrosts were aborted after 60 minutes (RF175W) or 40 minutes…20The flapper heater current is low.21The flapper heater current is high.22The resistance of the PC sensor 2 is outside the normal range (> 45K Ohms)23The resistance of the PC sensor 2 is outside the normal range (< 660 Ohms)24The resistance of the ice tray sensor is outside the normal range (> 45K Ohms)25The resistance of the ice tray sensor is outside the normal range (< 660 Ohms)26The icemaker motor timed out27The icemaker motor current is high.28The icemaker solenoid current is high.29The icemaker solenoid current is low.3The resistance of all the temperature sensors is outside the normal range (>…4The resistance of all the temperature sensors is outside the normal range (<…40Icemaker solenoid transistor 1 short circuit41Icemaker solenoid transistor 2 short circuit.42The icemaker fill tube nozzle heater current is high43The icemaker fill tube nozzle heater current is low (element open circuit)44The PC return duct heater current is too high45The PC return duct heater current is too low5The resistance of the FC sensor is outside the normal range (> 45K Ohms).
View all 36 error codes

Service modes (16)

  • Data Download Mode (RF175W)1
  • Data Download Mode (RF195A)Press and hold the MENU key, then press the UP key for 4 seconds, then press the DOWN key
  • Diagnostic Mode (RF175W)Press and hold the MODE button, then press the TEMPERATURE UP button. The LEDs indicate the PC…
  • Diagnostic Mode (RF195A)Press and hold the MENU key, then press the UP key for 4 seconds. LCD displays PC sensor…
  • Disable Filter Alarm (RF195A)Press and hold MENU + UP + LOCK keys for 4 seconds.
  • Dispenser Lock (RF195A)Press the LOCK key for 2 seconds.
  • Filter Reset (RF195A)Press the UP and LOCK keys for 4 seconds.
  • Forced Defrost (RF175W)1a
  • Forced Defrost (RF195A)While pressing and holding the MENU key, press the DOWN key for 4 seconds.
  • Forced Icemaker Harvest (RF195A)Press LOCK key first, then press the DOWN and UP keys and hold all three keys for 4 seconds.
  • Key Lock (RF195A)Press the LOCK key for 4 seconds.
  • Key Silent Mode (RF195A)Hold the MENU key for 4 seconds.
  • Sabbath Mode (RF195A)Press LOCK + MENU + DOWN keys and hold for 4 seconds.
  • Show Off Mode (RF195A)Press and hold MENU + DOWN + UP keys for 4 seconds.
  • Show Room Mode (RF175W)Enter diagnostic mode (press MODE and TEMPERATURE UP together), then hold TEMPERATURE UP button…
  • Special Option Mode / Sabbath Mode (RF175W / Israel)With both PC and FC doors open, push and hold the MODE button on the display board for 10 seconds.

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass