mypros+
Model reference

Samsung WF218ANW

Washer

9 documents29 error codes

Available documentation

Service Manual

  • Washing Machine Drum Type Service Manual2 pg
    Covers this model
  • Washing Machine user manual56 pg
    Covers this model
  • Washing Machine Drum Type Service Manual88 pg
    Covers this model
  • Washing Machine Drum Type Service Manual44 pg
    Covers this model
  • Washing Machine Service Manual - LG Samsung WF229ANG38 pg
    Covers this model
  • Washing Machine Drum Type Service Manual2 pg
    Covers this model

Bulletin

  • SERVICE BULLETIN - The washer will not complete an entire spin cycle, especially in cold weather1 pg
    Covers this model

Service Flash

  • Service Flash Will Not Spin Above 400 RPM _ Direct Drive Motor Hall Sensor1 pg
    Covers this model

Other

  • Samsung_WF218ANW_XAA_Washer_Service_Manual38 pg
    Covers this model
MyPros+ Max

Diagnose your Samsung WF218ANW.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (29)

CodeMeaning
1EWater level sensor error caused by damaged, clogged, or folded sensor hose…2EPower error due to momentary power failure; displays to notify power failure…3EMotor driving error due to restrained revolutions caused by motor spin net not…bEMotor overloaded due to too much laundry (non-sensing), motor hall sensor…CEProblem with control.dcUnbalance error caused by laundry contents creating an imbalanced load in the…dEThe door will not unlock.dLDoor error during operation caused by pressure difference from internal…dsDoor is open when washer is running.E2Switch error where a button (Power or other) is continually pressed, or main…E3Motor driving error from PBA weakness or interference generated due to too much…E8Mems PBA error detected or data error detected; check wire connections and…FLDoor lock fail error when the door cannot be locked.HEWater temperature control problem (Heater Control problem).HrHeater relay error due to washing heater short-circuit or wire disconnection…LEWater level sensor error caused by damaged, clogged, or folded hose, excessive…LODoor unlock fail error when the door is not locked after the door close…ndDrain error caused by damaged pump motor impeller, wrong voltage supplied, part…nFWater supply error due to foreign material in water supply valve, disconnected…nHThe hot/cold water hose connection is not correct.OEOverflow error where water is supplied continually because water level…PbElectric service was lost when washer was running.PFCommunication error where signals between sub and main PBAs are not sensed due…SdFoaming detected error displayed when too much foaming is detected; also…SrMain relay error where the PBA main relay is short-circuited or the terminal is…SUdSFoaming detected error displayed when too much foaming is detected; displayed…tETemperature sensor error due to washing temperature sensor fault, dry…tSTemperature sensor problem.UEHigh/Low voltage detected.

Related Samsung washer models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass