mypros+
Model reference

Fisher & Paykel 96200

Washer

2 documents51 error codes7 service modes

Available documentation

Service Manual

  • Phase 7 Electronic Washing Machines56 pg
    Covers this model
  • Ecosmart Phase 7 Electronic Washing Machines56 pg
    Covers this model
MyPros+ Max

Diagnose your Fisher & Paykel 96200.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (51)

CodeMeaning
1Motor Control Module EEPROM write error.10Temperature sensor (thermistor) may be open circuit or ambient temperature is…104Communications error (see fault code 106).105Communications error time out106Display Module to Motor Control Module communications error.107Motor Control Module reset error108Communications CRC error (see fault code 106).109AC pump triac over temperature110Motor bridge thermistor open circuit111Motor bridge thermistor short circuit.112Motor current sense too high113AC pump thermistor short circuit12Flood protection error130Single rotor position sensor error136Motor stall160Basket engaged230EEPROM value out of range232Communications timeout 5 seconds233EEPROM read error234Lid lock open circuit.235Lid lock short circuit236Incompatible EEPROM version237Temperature sensor error238Lid lock fail in-line test (1)239Lid lock fail in-line test (2)240Hall out of order / RPS fault241Function time out243Stepper test failure252Bridge test failure3Motor Control Module memory error.
View all 51 error codes
36Water leak fault37Pump blocked error38Pressure sensor fault39Pressure tube fault40Basket dis-engage fault41Temperature sensor fault45Display memory check fault46Display memory EEPROM check48Both hot and cold valve coils faulty49Cold valve coil faulty50Hot valve coil faulty51Diverter valve fault52Diverter top-up fault56Basket check no valid fault57Brown out during Display EEPROM write60Motor Control memory check fault68Pressure transducer error69Pressure transducer error70Pressure transducer error72Pressure transducer error9Display size switch setting does not match what is stored in memory.

Service modes (7)

  • demonstration_mode["Press and hold Advance, then press Power."]
  • diagnostic["Turn the power on at the power point but off at the machine.","Press and hold WASH TEMPERATURE…
  • option_adjustment["Plug the machine in but do not press POWER.","Press and hold the Start/Pause button, then press…
  • recycle_feature["Enter diagnostic mode.","Press WATER LEVEL UP so that the Medium water level LED is lit.","Press…
  • restart_feature_disable["Enter diagnostic mode.","Press WATER LEVEL DOWN so that the low water level LED is lit.","Press…
  • restart_feature_toggle["Enter diagnostic mode.","Press WATER LEVEL DOWN so that the low water level LED is lit.","Press…
  • size_setting["Turn the power on at the power point and off at the console.","Press and hold WASH TEMPERATURE…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Fisher & Paykel washer models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax