Model reference

Samsung WA52J8700AW/AA

Name: Samsung WA52J8700AW/AA
Brand: Samsung

Washer

4 documents36 error codes

Available documentation

Service Manual

Washing Machine (Top-loading) Service Manual38 pg
Covers this model
WASHING MACHINE (TOP-LOADING) SERVICE MANUAL38 pg
Covers this model
WASHING MACHINE (TOP-LOADING) SERVICE Manual38 pg
Covers this model

Other

LG Samsung WA8700J WA52J8700AP AA38 pg
Covers this model

MyPros+ Max

Diagnose your Samsung WA52J8700AW/AA.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Samsung Washer

1C on my Samsung WA52J8700AW/AA

M+

Water level sensor error caused by

From Service Manual 484795, p.47:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part DA92-00384N

Main PCB assembly

Error codes (36)

CodeMeaning

1CWater level sensor error caused by damaged, clogged, or folded sensor hose…3CMotor driving check and hall sensor check error due to PBA connector not…4CWater supply check error caused by foreign material entering the water supply…4C2Water supply temperature error 5CDrain check error caused by damaged pump motor impeller, wrong voltage…8CClutch motor error 8C1Mems PBA check detected 8C2Mems PBA check detected 9C1Power check error caused by under or over voltage supply, use of plug…9C2Power check error caused by under or over voltage supply, use of plug…ACCommunication check error AC2Communication check error between the DR Module and main PBAs due to…AC3Communication check error between the WIFI Module and main PBAs due to…AC4Communication check error between the LCD Module and main PBAs due to…AC5Communication check error between the Inverter PBA and main PBA due to…AC6Communication check error related to I/O Board communication.BC2Switch check (Main Relay check) error DCDoor check error caused by door switch contact fault from deformation of door…DC1Door lock switch error DC2Door check error occurring if the Power switch is turned on/off continually and…HCHeater check error HC1Heater check error HC2Drying heater is short-circuited or has a wire disconnected.LCWater leakage check error caused by displaced air hose, broken tub back…LC1Water leakage check error caused by displaced air hose, broken tub back…OCOverflow check error PCClutch motor error PC1Clutch sensor error SF1System check error SF2System check error

View all 36 error codes

SF3System check error SUDToo much foaming detected; displayed while foaming is being removed TC1Temperature sensor check error TC2Temperature sensor check error TC4IPM temperature is abnormally high.UBUnbalance check error caused by unevenly distributed laundry.

Related Samsung washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass