Model reference

Samsung WA11F5S4QTA/TL

Name: Samsung WA11F5S4QTA/TL
Brand: Samsung

Washer

1 document35 error codes

Available documentation

Service Manual

Washing Machine (Fully Automatic Type) Service Manual42 pg
Covers this model

MyPros+ Max

Diagnose your Samsung WA11F5S4QTA/TL.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Samsung Washer

1E on my Samsung WA11F5S4QTA/TL

M+

Water level sensor error caused by

From Service Manual 869137, p.29:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part DA92-00384N

Main PCB assembly

Error codes (35)

CodeMeaning

1EWater level sensor error caused by damaged/clogged/folded air hose, excessive…3EMotor driving error or hall sensor error caused by disconnected PBA connector…3E1Motor overloaded due to too much laundry (non-sensing), disconnected motor hall…3E2Motor driving error from PBA is weak, such as unstable relay operation.3E3Erroneous operating signals for motor hall sensor, disconnected IPM terminal of…3E4PCB housing terminal not connected, PBA fault, or DD motor fault.4EWater supply error caused by foreign material in water supply valve…4E1Cold and warm water supply hoses are wrongly engaged; during dry cycle, water…4E2Water temperature sensed as higher than 50°C in Wool or Lingerie courses.5EDrain error caused by damaged pump motor impeller, wrong voltage to parts, part…8E1Mems PBA error or data error detected.9E1Power error 9E2Power error, sometimes caused by main PBA fault.AECommunication error between sub and main PBAs; signals not sensed due to…AE6Inverter communication error; signals between inverter and main PBAs not sensed.bE1Switch error bE2A button other than Power is continually pressed for more than 30 seconds…bE3Main relay of PBA is short-circuited or main relay terminal is connected…CECooling error dEDoor error caused by switch contact error from deformation of door hook or door…dE1Door lock switch terminal connected incorrectly or door lock switch terminal is…dE2Occurs if Power switch is turned on/off continually and too much heat is…FEFan error HEHeater error HE1Heater error variant related to washing heater or PBA relay malfunction.HE2Red temperature sensor at center of dry heater operated at temperature higher…HE3Steam function does not operate normally; does not occur in existing drum…LEWater leakage error caused by heater out of place, air hose displaced, broken…OEOverflow error PFMomentary power failure occurred; not a fault

View all 35 error codes

SUdSToo much foaming detected; displayed while foaming is removed tE1Temperature sensor error tE2Duct assy fan housing temperature sensor fault (internal short-circuit or wire…tE3Duct condensing temperature sensor is open, has wire disconnected, or is…UEUnbalance error caused by unevenly distributed laundry.

Related Samsung washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass