mypros+
Model reference

Samsung WF330ANB/XAA-00

Washer

2 documents31 error codes4 service modes

Available documentation

Tech Sheet

  • Fast Track Troubleshooting7 pg
    Covers this model

Service Manual

  • Washing Machine Drum Type Service Manual40 pg
    Covers this model
MyPros+ Max

Diagnose your Samsung WF330ANB/XAA-00.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (31)

CodeMeaning
11EEPROM Fault.1EWater Level Sensor trouble, signal out of range.29Temperature Sensor Error2EPower error occurring during momentary power failure; operation restarts from…3EMotor driving error due to motor coil damage (short-circuited or cut), hall…7ESilver Care Kit (Silver Care PCB) Failure.8EMEMS or Harness Failure.9E1Overflow errorAECommunication ErrorbEMotor error caused by DD motor cover out of place, PCB housing terminal not…dcUnbalance error caused by laundry contents creating an unbalanced load.dLDoor error during operation caused by pressure difference from internal…dSDoor error before operation caused by switch contact error from deformation of…E2Switch error or main relay error caused by Power button pressed continually for…E3Motor driving error from weak PBA output, unstable relay operation, or…E8Mems PBA error detected or data error detected.FLDoor lock fail error when the door is not locked after the door close operation.HrHeater relay error caused by short-circuited or disconnected washing heater…LEWater level sensor error caused by damaged, clogged, or folded hose, faulty…LODoor unlock fail error when the door is not opened after the door open…ndDrain error caused by clogged drain hose, foreign material in drain pump…nFWater supply error due to foreign material in water supply valve, disconnected…nF1Fill hoses reversedOEOverflow error where water is supplied continually because water level…PFCommunication error where signals between the sub and main PBAs are not sensed.SF1System Error.SF2System Error.SF3System Error.SrMain relay of the PBA is short-circuited, terminal connected incorrectly, or…SUdSToo much foaming detected; displayed while foaming is being removed
View all 31 error codes
tETemperature sensor error caused by faulty washing temperature sensor, dry…

Service modes (4)

  • EEPROM Clear ModeWith power off, press Delay Start, Signal and Power Key at the same time.
  • Quick Test ModeWith power off, press Soil, Signal, & Power simultaneously.
  • Service ModeWith power on, press Signal & Delay Start simultaneously.
  • Spin Only ModePower on, press and hold Spin until display changes

Full entry steps, exit procedures, and test sequences are available in Max.

Related Samsung washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass