Model reference

Samsung WF45H6300AW/A2

Name: Samsung WF45H6300AW/A2
Brand: Samsung

Washer

3 documents28 error codes

Available documentation

Service Manual

WASHING MACHINE (DRUM) SERVICE Manual41 pg
Covers this model
Washing Machine Drum Type Service Manual41 pg
Covers this model
Samsung WF50K7500AV A2 Washer Service Manual41 pg
Covers this model

MyPros+ Max

Diagnose your Samsung WF45H6300AW/A2.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Samsung Washer

1E on my Samsung WF45H6300AW/A2

M+

Water level sensor error caused by

From Service Manual 907453, p.25:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part DA92-00384N

Main PCB assembly

Error codes (28)

CodeMeaning

1EWater level sensor error caused by damaged/clogged/folded hose, faulty sensor…3EMotor driving error and hall sensor error caused by motor coil damage, hall…4EWater supply error caused by foreign material in water supply valve…4E2Water supply error where water temperature is sensed higher than 70°C during…5EDrain error caused by clogged drain hose, foreign material in drain pump…8EMEMS PBA error detected or data error detected.8E1MEMS PBA error detected or data error detected.8E2MEMS PBA error detected; check wire connections and replace Mems PBA.9E1Power error caused by under or over voltage supply to the washing machine.9E2Power error caused by under or over voltage supply to the washing machine.AECommunication error between the sub and main PBAs due to incorrect or loose…AE3Communication error between the DR Module and main PBA.AE4Communication error between the WIFI Module and main PBA.AE5Communication error between the LCD Module and main PBA.AE6Communication error between the Inverter PBA and main PBA.bE2Switch error (Main Relay Error) where a button is continually pressed due to…dEDoor error caused by switch contact error from deformed door hook, door pulled…dE1Door error where the door lock switch terminal is connected incorrectly…HEHeater error caused by short-circuited or disconnected washing heater, contact…HE1Heater error caused by short-circuited or disconnected washing heater, contact…LEWater leakage error caused by misplaced air hose, broken tub back, excessive…oEOverflow error caused by continuous water supply due to water level detection…SF1System error caused by micro controller operation failure.SF2System error caused by micro controller operation failure.SF3System error caused by micro controller operation failure.SUdExcessive foaming detected; displayed while foaming is being removed, normal…tE1Temperature sensor error caused by faulty washing/dry temperature sensor…uEUnbalance error caused by laundry load distribution; check laundry contents for…

Related Samsung washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass