mypros+
Model reference

Samsung WA48H7400AW/AA

Washer

5 documents55 error codes2 service modes

Available documentation

Service Manual

  • WASHING MACHINE (TOP-LOADING) SERVICE Manual35 pg
    Covers this model
  • WASHING MACHINE (TOP-LOADING) SERVICE Manual35 pg
    Covers this model
  • Washing Machine Top-loading Type Service Manual37 pg
    Covers this model

Bulletin

  • Clutch Assembly Design Change PE/PC, PE1/PC1 (Clutch Error)2 pg
    Covers this model

Other

  • LG Samsung WA48H7400AP WA48H7400AP A2 SM35 pg
    Covers this model
MyPros+ Max

Diagnose your Samsung WA48H7400AW/AA.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (55)

CodeMeaning
1CWater level sensor error due to damaged, clogged, or folded hose, faulty…1EWater Level Sensor Trouble3CMotor driving check and hall sensor check error due to motor coil damage, hall…3EMICOM is attempting to drive the motor but is not getting any response signals…4CWater supply check error due to foreign material in water supply valve…4C2Water supply temperature error4EFilling continues for more than 60 minutes or there is no change of water level…4E2The hot/cold water hose connection is not correct.5CDrain check error due to damaged pump motor impeller, wrong voltage, frozen…5EThe water level fails to drop below the Reset Water Level within 30 minutes…8CMems PBA check detected8C1Mems PBA check detected8C2Mems PBA check8EOutput from the MEMS sensor is over 4.5V or under 0.5V continuously for 5…8E1Output from the MEMS sensor is over 4.5V or under 0.5V continuously for 5…8E2Output from the MEMS sensor is over 4.5V or under 0.5V continuously for 5…9C1Power check error due to under or over voltage being supplied to the unit.9C2Power check error due to under or over voltage being supplied to the unit.ACCommunication check errorAC2Communication check error between the DR Module and main PBA.AC3Communication check error between the WIFI Module and main PBA.AC4Communication check error between the LCD Module and main PBA.AC5Communication check error between the Inverter PBA and main PBA.AC6Communication check error between the Inverter PBA and main PBA (alternate…AECommunication error between SUB PBA and MAIN PBA.BC2Switch check (main relay check)bE2A button except the Power button is continually pressed.DCDoor check errorDC1Door lock switch terminal connected incorrectly, broken, or intermittent…DC2Door check error occurring if the Power switch is turned on/off continually and…
View all 55 error codes

Service modes (2)

  • Board Input TestReferenced in troubleshooting for checking Water Temperature; specific button entry sequence not…
  • Quick Test ModeReferenced in troubleshooting for Door Lock/Unlock Test and Motor Test; specific button entry…

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass