mypros+
Error code reference

Electrolux Range Error Code E35

AC Input voltage too high.

Electrolux codesElectrolux range codes

AC Input voltage too high.

First step from the service manual

Verify chassis ground wire connection to terminal X17 on filter board and to chassis ground.

The complete diagnostic procedure includes additional test steps, resistance specifications, wiring diagram references, and component test points.

MyPros+ Max

Get the full diagnostic procedure for E35.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What E35 means on a Electrolux range

The E35 error code on an Electrolux range indicates that the AC input voltage supplied to the appliance is reading above the acceptable operating threshold. The range's control system continuously monitors incoming line voltage, and when that voltage exceeds the designed limit, the control board triggers this fault to protect internal components from overvoltage damage. This is a power supply fault, not a mechanical or heating element failure.

The filter board plays a central role in this circuit. The chassis ground wire connection to terminal X17 on the filter board is the first component to inspect, because a missing or loose ground reference can cause the control system to misread voltage levels and falsely report an overvoltage condition. A compromised ground path can introduce noise or reference errors that skew the voltage monitoring circuit's readings, producing an E35 fault even when actual line voltage is within normal range.

If the ground connection at X17 is confirmed secure and properly connected to chassis ground, the fault may reflect a genuine overvoltage situation at the electrical supply. This can result from utility supply irregularities, a shared circuit with high-voltage fluctuations, or a wiring problem at the home's electrical panel or the range's dedicated circuit. In those cases, verifying actual line voltage with a multimeter at the range's terminal block is the appropriate next diagnostic step.

Source: manufacturer service documentation.

Common causes of E35

  1. 01

    Loose or missing ground wire at terminal X17 on the filter board

    Wiring / connection

    A disconnected or poorly secured chassis ground wire at terminal X17 can cause the control board to misinterpret voltage readings and trigger a false E35 fault. Inspect the connection visually and ensure the wire is firmly seated and the terminal is not corroded.

  2. 02

    Faulty chassis ground path to the range body

    Wiring / connection

    Even if the wire is connected at X17, a broken or high-resistance ground path between that terminal and the range chassis can produce the same false overvoltage reading. Check the full length of the ground wire and all attachment points for damage or looseness.

  3. 03

    Actual high line voltage from the utility supply

    Wiring / connection

    If the home's incoming AC voltage is genuinely elevated above the range's rated input limit, the fault will be legitimate. Measure the voltage at the range's terminal block or wall receptacle with a multimeter to confirm whether the supply voltage is out of range.

  4. 04

    Wiring issue at the dedicated circuit or electrical panel

    Wiring / connection

    A wiring fault in the range's dedicated circuit, such as a miswired neutral or a connection issue at the breaker, can cause voltage irregularities that trigger E35. This typically requires inspection by a licensed electrician.

  5. 05

    Faulty filter board

    Part replacement

    If the ground connections and supply voltage are both confirmed good but the E35 fault persists, the filter board itself may have failed internally and is misreporting voltage to the main control board. Replacing the filter board would be the next step.

See the test procedure for each cause

Frequently asked questions about E35

What does E35 mean on a Electrolux range?
E35 means the range's control system has detected that the incoming AC input voltage is too high. This can be caused by an actual overvoltage condition from your home's electrical supply, or by a faulty ground wire connection at terminal X17 on the filter board that causes a false reading. The range triggers this fault to protect its internal components from potential damage.
Can I fix the E35 error myself, or do I need a technician?
The first diagnostic step, checking the chassis ground wire at terminal X17 on the filter board, is something a confident DIYer comfortable working inside appliances can perform. However, if the issue involves the home's electrical supply voltage or the dedicated circuit wiring, a licensed electrician should be consulted. If the filter board needs replacement, that repair is best handled by a qualified appliance technician.
Is it safe to use my Electrolux range while the E35 code is active?
It is not recommended to continue using the range while E35 is active. An overvoltage condition, whether real or caused by a faulty ground reference, indicates a problem with the power supply circuit that could potentially damage the control board or other components over time. Have the issue diagnosed before resuming normal use.
Will resetting the range clear the E35 error code?
Resetting the range by cycling the power at the breaker may temporarily clear the E35 code, but if the underlying cause is not corrected, the fault will return. A loose ground wire at terminal X17 or an ongoing high-voltage supply issue will continue to trigger E35 until the root problem is actually repaired.
How much does it cost to repair an E35 error on an Electrolux range?
Repair costs depend on the cause. If the fix is simply reseating a loose ground wire, the cost is minimal and limited to a service call fee, typically in the range of $75 to $150. If the filter board needs replacement, parts and labor combined could range from $150 to $350 or more. If the issue originates with the home's electrical supply or circuit wiring, electrician fees would apply separately.

Related Electrolux range codes

All Electrolux range codes
View all 175 Electrolux range codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass