mypros+
Error code reference

Samsung Air Conditioner Error Code P507

Compressor down by high pressure sensor protection control 1.

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the P507 error code actually means

Your Samsung air conditioner detected that the pressure inside the cooling system got dangerously high, so it shut itself off to prevent damage. This usually happens because something is blocking the outdoor unit from releasing heat properly, such as a faulty fan or a refrigerant issue. A technician will need to inspect the outdoor unit components and refrigerant levels to get the system running safely again.

Diagnostic procedure

The full P507 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Check service valves, fan motor operation, refrigerant charge.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock P507 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of P507

Ranked by how often they cause this code
  1. 1Closed or partially closed service valves
  2. 2Outdoor fan motor failure or reduced airflow
  3. 3Incorrect refrigerant charge
  4. 4Non-condensable gases in the refrigerant circuit
  5. 5Condenser coil blockage

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about P507

What does P507 mean on a Samsung air conditioner?
P507 means the Samsung air conditioner has shut down the compressor because the high pressure sensor detected unsafe refrigerant pressure on the discharge side of the system. This is a protective function designed to prevent compressor and refrigerant circuit damage. The unit will not restart normally until the underlying cause of elevated high-side pressure is corrected.
Will resetting the unit clear the P507 error?
Resetting the unit may temporarily clear the P507 fault and allow the compressor to restart, but the error will return if the root cause has not been addressed. High-side pressure will exceed the safety threshold again under operating conditions, causing the compressor to shut down repeatedly. A reset should only be used after performing diagnostic checks and correcting any identified issues.
How much does it cost to repair a Samsung air conditioner showing P507?
Repair costs vary depending on the root cause identified. Simple service valve adjustments or coil cleaning may only involve a diagnostic service call fee, typically in the range of $75 to $150. Outdoor fan motor replacement can cost between $150 and $400 including parts and labor. If refrigerant recovery, evacuation, and recharge are needed, costs can range from $200 to $600 or more depending on the refrigerant type and system capacity.
Can I fix P507 on my Samsung air conditioner myself?
Some steps, such as checking that outdoor unit service valves are fully open and cleaning a blocked condenser coil, can be performed without specialized tools. However, diagnosing refrigerant charge issues, checking fan motor performance, and working with refrigerants requires EPA certification and professional equipment. If basic checks do not resolve the error, a licensed HVAC technician should be called.
Is P507 on a Samsung air conditioner a safety concern?
Yes, persistently high refrigerant pressure is a serious condition that can stress compressor components, refrigerant lines, and fittings. The P507 protection control is designed to shut the compressor down before damage occurs, so the system should not be forced to run while this fault is active. Continued operation attempts without resolving the cause can lead to compressor failure or refrigerant line rupture.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass